Autodesk (ADSK)

TotalReturn:

'Total return is the amount of value an investor earns from a security over a specific period, typically one year, when all distributions are reinvested. Total return is expressed as a percentage of the amount invested. For example, a total return of 20% means the security increased by 20% of its original value due to a price increase, distribution of dividends (if a stock), coupons (if a bond) or capital gains (if a fund). Total return is a strong measure of an investment’s overall performance.'

• Looking at the total return, or performance of 50.7% in the last 5 years of Autodesk, we see it is relatively lower, thus worse in comparison to the benchmark SPY (107.8%)
• Looking at total return in of 45.1% in the period of the last 3 years, we see it is relatively larger, thus better in comparison to SPY (34.1%).

CAGR:

'The compound annual growth rate isn't a true return rate, but rather a representational figure. It is essentially a number that describes the rate at which an investment would have grown if it had grown the same rate every year and the profits were reinvested at the end of each year. In reality, this sort of performance is unlikely. However, CAGR can be used to smooth returns so that they may be more easily understood when compared to alternative investments.'

• Looking at the compounded annual growth rate (CAGR) of 8.6% in the last 5 years of Autodesk, we see it is relatively lower, thus worse in comparison to the benchmark SPY (15.8%)
• Looking at compounded annual growth rate (CAGR) in of 13.3% in the period of the last 3 years, we see it is relatively higher, thus better in comparison to SPY (10.3%).

Volatility:

'Volatility is a rate at which the price of a security increases or decreases for a given set of returns. Volatility is measured by calculating the standard deviation of the annualized returns over a given period of time. It shows the range to which the price of a security may increase or decrease. Volatility measures the risk of a security. It is used in option pricing formula to gauge the fluctuations in the returns of the underlying assets. Volatility indicates the pricing behavior of the security and helps estimate the fluctuations that may happen in a short period of time.'

• The 30 days standard deviation over 5 years of Autodesk is 35.7%, which is higher, thus worse compared to the benchmark SPY (18%) in the same period.
• Compared with SPY (18.8%) in the period of the last 3 years, the volatility of 35.3% is larger, thus worse.

DownVol:

'Risk measures typically quantify the downside risk, whereas the standard deviation (an example of a deviation risk measure) measures both the upside and downside risk. Specifically, downside risk in our definition is the semi-deviation, that is the standard deviation of all negative returns.'

• Compared with the benchmark SPY (12.5%) in the period of the last 5 years, the downside deviation of 25.5% of Autodesk is greater, thus worse.
• Looking at downside risk in of 24% in the period of the last 3 years, we see it is relatively greater, thus worse in comparison to SPY (13%).

Sharpe:

'The Sharpe ratio is the measure of risk-adjusted return of a financial portfolio. Sharpe ratio is a measure of excess portfolio return over the risk-free rate relative to its standard deviation. Normally, the 90-day Treasury bill rate is taken as the proxy for risk-free rate. A portfolio with a higher Sharpe ratio is considered superior relative to its peers. The measure was named after William F Sharpe, a Nobel laureate and professor of finance, emeritus at Stanford University.'

• Looking at the Sharpe Ratio of 0.17 in the last 5 years of Autodesk, we see it is relatively lower, thus worse in comparison to the benchmark SPY (0.74)
• Looking at Sharpe Ratio in of 0.31 in the period of the last 3 years, we see it is relatively smaller, thus worse in comparison to SPY (0.41).

Sortino:

'The Sortino ratio measures the risk-adjusted return of an investment asset, portfolio, or strategy. It is a modification of the Sharpe ratio but penalizes only those returns falling below a user-specified target or required rate of return, while the Sharpe ratio penalizes both upside and downside volatility equally. Though both ratios measure an investment's risk-adjusted return, they do so in significantly different ways that will frequently lead to differing conclusions as to the true nature of the investment's return-generating efficiency. The Sortino ratio is used as a way to compare the risk-adjusted performance of programs with differing risk and return profiles. In general, risk-adjusted returns seek to normalize the risk across programs and then see which has the higher return unit per risk.'

• Compared with the benchmark SPY (1.06) in the period of the last 5 years, the downside risk / excess return profile of 0.24 of Autodesk is lower, thus worse.
• Looking at downside risk / excess return profile in of 0.45 in the period of the last 3 years, we see it is relatively smaller, thus worse in comparison to SPY (0.6).

Ulcer:

'The ulcer index is a stock market risk measure or technical analysis indicator devised by Peter Martin in 1987, and published by him and Byron McCann in their 1989 book The Investors Guide to Fidelity Funds. It's designed as a measure of volatility, but only volatility in the downward direction, i.e. the amount of drawdown or retracement occurring over a period. Other volatility measures like standard deviation treat up and down movement equally, but a trader doesn't mind upward movement, it's the downside that causes stress and stomach ulcers that the index's name suggests.'

• Compared with the benchmark SPY (8.45 ) in the period of the last 5 years, the Ulcer Ratio of 29 of Autodesk is higher, thus worse.
• During the last 3 years, the Ulcer Ratio is 12 , which is greater, thus worse than the value of 5.73 from the benchmark.

MaxDD:

'A maximum drawdown is the maximum loss from a peak to a trough of a portfolio, before a new peak is attained. Maximum Drawdown is an indicator of downside risk over a specified time period. It can be used both as a stand-alone measure or as an input into other metrics such as 'Return over Maximum Drawdown' and the Calmar Ratio. Maximum Drawdown is expressed in percentage terms.'

• The maximum drop from peak to valley over 5 years of Autodesk is -52 days, which is lower, thus worse compared to the benchmark SPY (-24.5 days) in the same period.
• Compared with SPY (-18.8 days) in the period of the last 3 years, the maximum reduction from previous high of -25.7 days is lower, thus worse.

MaxDuration:

'The Drawdown Duration is the length of any peak to peak period, or the time between new equity highs. The Max Drawdown Duration is the worst (the maximum/longest) amount of time an investment has seen between peaks (equity highs) in days.'

• Compared with the benchmark SPY (488 days) in the period of the last 5 years, the maximum days below previous high of 919 days of Autodesk is larger, thus worse.
• Looking at maximum days under water in of 334 days in the period of the last 3 years, we see it is relatively greater, thus worse in comparison to SPY (199 days).

AveDuration:

'The Drawdown Duration is the length of any peak to peak period, or the time between new equity highs. The Avg Drawdown Duration is the average amount of time an investment has seen between peaks (equity highs), or in other terms the average of time under water of all drawdowns. So in contrast to the Maximum duration it does not measure only one drawdown event but calculates the average of all.'

• Looking at the average days below previous high of 359 days in the last 5 years of Autodesk, we see it is relatively greater, thus worse in comparison to the benchmark SPY (118 days)
• During the last 3 years, the average days under water is 104 days, which is greater, thus worse than the value of 45 days from the benchmark.