Description

Monolithic Power Systems, Inc. - Common Stock

Statistics (YTD)

What do these metrics mean? [Read More] [Hide]

TotalReturn:

'Total return is the amount of value an investor earns from a security over a specific period, typically one year, when all distributions are reinvested. Total return is expressed as a percentage of the amount invested. For example, a total return of 20% means the security increased by 20% of its original value due to a price increase, distribution of dividends (if a stock), coupons (if a bond) or capital gains (if a fund). Total return is a strong measure of an investment’s overall performance.'

Using this definition on our asset we see for example:
  • Looking at the total return, or increase in value of 126% in the last 5 years of Monolithic Power Systems, we see it is relatively larger, thus better in comparison to the benchmark SPY (67.8%)
  • Looking at total return, or increase in value in of 146.5% in the period of the last 3 years, we see it is relatively larger, thus better in comparison to SPY (75%).

CAGR:

'The compound annual growth rate isn't a true return rate, but rather a representational figure. It is essentially a number that describes the rate at which an investment would have grown if it had grown the same rate every year and the profits were reinvested at the end of each year. In reality, this sort of performance is unlikely. However, CAGR can be used to smooth returns so that they may be more easily understood when compared to alternative investments.'

Applying this definition to our asset in some examples:
  • Compared with the benchmark SPY (11%) in the period of the last 5 years, the annual return (CAGR) of 17.8% of Monolithic Power Systems is higher, thus better.
  • Compared with SPY (20.6%) in the period of the last 3 years, the annual return (CAGR) of 35.2% is greater, thus better.

Volatility:

'Volatility is a statistical measure of the dispersion of returns for a given security or market index. Volatility can either be measured by using the standard deviation or variance between returns from that same security or market index. Commonly, the higher the volatility, the riskier the security. In the securities markets, volatility is often associated with big swings in either direction. For example, when the stock market rises and falls more than one percent over a sustained period of time, it is called a 'volatile' market.'

Applying this definition to our asset in some examples:
  • Looking at the volatility of 55.8% in the last 5 years of Monolithic Power Systems, we see it is relatively higher, thus worse in comparison to the benchmark SPY (17.3%)
  • Compared with SPY (15.4%) in the period of the last 3 years, the volatility of 55.9% is larger, thus worse.

DownVol:

'The downside volatility is similar to the volatility, or standard deviation, but only takes losing/negative periods into account.'

Applying this definition to our asset in some examples:
  • The downside volatility over 5 years of Monolithic Power Systems is 37.9%, which is higher, thus worse compared to the benchmark SPY (12%) in the same period.
  • Compared with SPY (10.4%) in the period of the last 3 years, the downside volatility of 38.2% is larger, thus worse.

Sharpe:

'The Sharpe ratio is the measure of risk-adjusted return of a financial portfolio. Sharpe ratio is a measure of excess portfolio return over the risk-free rate relative to its standard deviation. Normally, the 90-day Treasury bill rate is taken as the proxy for risk-free rate. A portfolio with a higher Sharpe ratio is considered superior relative to its peers. The measure was named after William F Sharpe, a Nobel laureate and professor of finance, emeritus at Stanford University.'

Which means for our asset as example:
  • Looking at the Sharpe Ratio of 0.27 in the last 5 years of Monolithic Power Systems, we see it is relatively lower, thus worse in comparison to the benchmark SPY (0.49)
  • During the last 3 years, the ratio of return and volatility (Sharpe) is 0.59, which is smaller, thus worse than the value of 1.17 from the benchmark.

Sortino:

'The Sortino ratio measures the risk-adjusted return of an investment asset, portfolio, or strategy. It is a modification of the Sharpe ratio but penalizes only those returns falling below a user-specified target or required rate of return, while the Sharpe ratio penalizes both upside and downside volatility equally. Though both ratios measure an investment's risk-adjusted return, they do so in significantly different ways that will frequently lead to differing conclusions as to the true nature of the investment's return-generating efficiency. The Sortino ratio is used as a way to compare the risk-adjusted performance of programs with differing risk and return profiles. In general, risk-adjusted returns seek to normalize the risk across programs and then see which has the higher return unit per risk.'

Which means for our asset as example:
  • Looking at the downside risk / excess return profile of 0.4 in the last 5 years of Monolithic Power Systems, we see it is relatively smaller, thus worse in comparison to the benchmark SPY (0.7)
  • During the last 3 years, the ratio of annual return and downside deviation is 0.86, which is smaller, thus worse than the value of 1.73 from the benchmark.

Ulcer:

'The Ulcer Index is a technical indicator that measures downside risk, in terms of both the depth and duration of price declines. The index increases in value as the price moves farther away from a recent high and falls as the price rises to new highs. The indicator is usually calculated over a 14-day period, with the Ulcer Index showing the percentage drawdown a trader can expect from the high over that period. The greater the value of the Ulcer Index, the longer it takes for a stock to get back to the former high.'

Using this definition on our asset we see for example:
  • Looking at the Ulcer Ratio of 21 in the last 5 years of Monolithic Power Systems, we see it is relatively larger, thus worse in comparison to the benchmark SPY (8.45 )
  • Looking at Ulcer Ratio in of 19 in the period of the last 3 years, we see it is relatively greater, thus worse in comparison to SPY (3.21 ).

MaxDD:

'A maximum drawdown is the maximum loss from a peak to a trough of a portfolio, before a new peak is attained. Maximum Drawdown is an indicator of downside risk over a specified time period. It can be used both as a stand-alone measure or as an input into other metrics such as 'Return over Maximum Drawdown' and the Calmar Ratio. Maximum Drawdown is expressed in percentage terms.'

Which means for our asset as example:
  • The maximum DrawDown over 5 years of Monolithic Power Systems is -51.6 days, which is smaller, thus worse compared to the benchmark SPY (-24.5 days) in the same period.
  • Looking at maximum DrawDown in of -51.6 days in the period of the last 3 years, we see it is relatively lower, thus worse in comparison to SPY (-18.8 days).

MaxDuration:

'The Drawdown Duration is the length of any peak to peak period, or the time between new equity highs. The Max Drawdown Duration is the worst (the maximum/longest) amount of time an investment has seen between peaks (equity highs). Many assume Max DD Duration is the length of time between new highs during which the Max DD (magnitude) occurred. But that isn’t always the case. The Max DD duration is the longest time between peaks, period. So it could be the time when the program also had its biggest peak to valley loss (and usually is, because the program needs a long time to recover from the largest loss), but it doesn’t have to be'

Which means for our asset as example:
  • The maximum days under water over 5 years of Monolithic Power Systems is 413 days, which is smaller, thus better compared to the benchmark SPY (488 days) in the same period.
  • During the last 3 years, the maximum days below previous high is 280 days, which is larger, thus worse than the value of 87 days from the benchmark.

AveDuration:

'The Average Drawdown Duration is an extension of the Maximum Drawdown. However, this metric does not explain the drawdown in dollars or percentages, rather in days, weeks, or months. The Avg Drawdown Duration is the average amount of time an investment has seen between peaks (equity highs), or in other terms the average of time under water of all drawdowns. So in contrast to the Maximum duration it does not measure only one drawdown event but calculates the average of all.'

Applying this definition to our asset in some examples:
  • Compared with the benchmark SPY (117 days) in the period of the last 5 years, the average days under water of 118 days of Monolithic Power Systems is higher, thus worse.
  • Compared with SPY (17 days) in the period of the last 3 years, the average days below previous high of 73 days is larger, thus worse.

Performance (YTD)

Historical returns have been extended using synthetic data.

Allocations ()

Allocations

Returns (%)

  • Note that yearly returns do not equal the sum of monthly returns due to compounding.
  • Performance results of Monolithic Power Systems are hypothetical and do not account for slippage, fees or taxes.